Yamaha 2000W 8 Channel Stereo Power Amplifier with Dante Support
Product Highlights:
- High and low impedance.
- New "Double Power Mode"
- Selectable input formats for a wider range of applications
- A perfect match for the MTX Series
- Protection features for more reliable operation
Yamaha XMV8280-D 2000W 8 Channel Stereo Power Amplifier with Dante Support
Yamaha 2000W 8 Channel Stereo Power Amplifier with Dante Support
Yamaha XMV8280-D - 2000W 8 Channel Stereo Power Amplifier with Dante Support
The Yamaha XMV Series multi-channel power amplifiers combine Class-D efficiency with features designed specifically to benefit commercial installation sound systems. The Series is comprised of 8 different models with varying output power capabilities and flexible in/out connectivity to accommodate a wide range of installation environments.
| Yamaha XMV8280-D Specs |
|---|
| Output Power |
1kHz, THD+N = 1%
4 Ohm: 280W x 8
8 Ohm: 280W x 8
4 Ohm/ Double Power Mode: 560W x 4
8 Ohm/ Double Power Mode: 560W x 4
High impedance
100V line: 250W x 8 / 40 Ohm
70V line: 250W x 8 / 20 Ohm |
| Voltage Gain |
RL=8Ohm: 31.7 dB
RL=8Ohm / Double Power Mode: 34.7 dB
100V: 38.2 dB
70V: 32.2 dB |
| Input Sensitivity |
RL= 8Ohm +4dBu |
| S/N Ration A-weighted |
100dB |
| Power Consumption |
1/8 power (4 Ohm pink noise): 450W
Idle (4 Ohm): 73W
Standby: 23W |
| THD+N |
1kHz, half power: 0.2% |
| Frequency Response |
RL= 8Ohm, 100V/70V, Po=1W, 20Hz- 20kHz: 0dB, ±1.0dB |
| Crosstalk |
1kHz, half power, 8 Ohm, Att. max,input 150 Ohm shunt: -60dB |
| Maximum Input Level |
+24dBu |
| Input Impedance |
20kOhm (balanced), 10k Ohm (unbalanced) |
| Connectors |
Analog Input: Euroblock x 2 (6P, balanced)
Digital Input / Output
RJ45 x 2 (YDIF IN / OUT)
RJ45 x 2 (Dante PRIMARY / SECONDARY)
Speaker Output: Barrier strip x 8 pairs
Network: RJ45 x 1 Shared with Dante ports
Remote, Fault Output: Euroblock (3P) x 1
AC IN: AC Inlet x 1 |
| Protection circuit |
Load Protection
POWER switch on/off: Output mute
DC-fault: Power supply shuts down, Clip limiting
Amplifier Protection:
Thermal: Output mute (heatsink temp = 90°C) (Restored automatically)
Overcurrent: Output mute (Restored automatically)
Low load impedance: Output mute (Restored automatically)
Power Supply Protection:
Thermal: Amplifier shuts down automatically (heatsink temp =100°C)
Integrated power: Gain reduction (Restored automatically) |
| Cooling Fan |
3-Speed fan x 2, front-to-back airflow
Power Requirements: 100V, 120V, 230V-240V; 50Hz/60Hz |
| Dimensions (WxHxD) |
18.9" x 3.5" x 16.6" (480 x 88 x 422 mm) |
| Weight |
22.3 lbs (10.1 kg) |
