Yamaha A-S2000 Natural Sound Stereo Amplifier (Black)

The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.

Yamaha A-S2000 Natural Sound Stereo Amplifier (Black)

(No reviews yet) Write a Review
  • Yamaha A-S2000 Natural Sound Stereo Amplifier (Black)
  • Yamaha A-S2000 Natural Sound Stereo Amplifier (Black)
  • Yamaha A-S2000 Natural Sound Stereo Amplifier (Black)
  • Yamaha A-S2000 Natural Sound Stereo Amplifier (Black)
SKU:
YAM-AS2000BL-90
Manufacturer Part:
Availability:
Special Order, Subject to Availability
Weight:
56.50 LBS
Shipping:
Free Shipping
$1,999.95
Quantity: 

Description

Yamaha A-S2000 Natural Sound Stereo Amplifier (Black)
Product Highlights:
- 90W x 2 Power Output at 8 Ohms
- Floating Balanced Power Amplifier
- Rotary Bass and Treble Controls
- Symmetrical Construction
- Discrete Phono Amp
- Headphone Amp for Low Impedance Drive
- Specially Designed Feet
- Continuously Variable Loudness Control
- Front-Panel Switching
- Yamaha A-S2000 Natural Sound Stereo Amplifier (Black)
- Remote Control
- 2 x Batteries (AA, R6, UM-3)
- Power Cable
- Safety Brochure
- Limited 2-Year Warranty
Yamaha A-S2000 Natural Sound Stereo Amplifier (Black)
Yamaha A-S2000 Natural Sound Stereo Amplifier (Black)
The black A-S2000 Natural Sound Stereo Amplifier from Yamaha boasts a power output of 90W x 2 (RMS) and uses high quality components and construction to provide fine acoustic performance. The A-S2000 achieves fully balanced signal transmission from input to output. Balanced transmission is capable of canceling internally and external noise, and for this reason, is considered to be an ideal amplification method. The A-S2000 offers full-stage balanced transmission, combining high-power output with excellent sound texture and outstanding S/N performance.
Maximum Power 8 ohms, 1 kHz, 10% THD: 120 W + 120 W / 4 ohms, 1 kHz, 10% THD: 190 W + 190 W
RMS Output Power Minimum: 8 ohms, 20 Hz-20 kHz, 0.02% THD: 90 W + 90 W / 4 ohms, 20 Hz-20 kHz, 0.02% THD: 150 W + 150 W
Dynamic Power per Channel 8 / 6 / 4 / 2 ohms: 105 / 135 / 190 / 220 W
Damping Factor 8 ohms, 1 kHz: 160
Input Sensitivity and Impedance CD 150 mV / 47 kohms, Phono MM 2.5 mV / 47 kohms, Phono MC 100 μV / 50 ohms, Main in 1 V / 47 kohms
Frequency Response CD, etc. to speaker out, Flat position 5 Hz-100 kHz +0 dB / -3 dB, CD, etc. to speaker out, Flat position 20 Hz-20 kHz +0 dB / -0.3 dB
Deviation RIAA Equalization Deviation: Phono MM (20 Hz-20 kHz) ±0.5 dB / Phono MC (20 Hz-20 kHz) ±0.5 dB
THD 20 Hz-20 kHz: CD balanced to speaker out 0.01% (90 W / 8 ohms), CD, etc. to speaker out 0.015% (90 W / 8 ohms), Phono MM to rec out 0.005% (2 V), Phono MC to rec out 0.05% (2 V)
Signal to Noise Ratio IHF-A Network: CD, etc., (150 mV, Input Shorted) 98 dB, Phono MM (5 mV, Input Shorted) 93 dB, Phono MC (500 μV, Input Shorted) 85 dB
Residual Noise CD, etc., IHF-A-Network
Channel Separation 1 kHz/10 kHz: CD, etc., Input 5.1 kohms Terminaled 74 dB / 54 dB, Phono MM, Input Shorted, Vol: -30 dB 90 dB / 77 dB, Phono MC, Input Shorted, Vol: -30 dB 66 dB / 77 dB
Tone Control Bass Boost / Cut (at 50 Hz) ±9 dB, Bass Turnover Frequency 350 Hz, Treble Boost / Cut (at 20 Hz) ±9 dB, Treble Turnover Frequency 3.5 kHz
Mute -20 dB (approx.)
Load Impedance If you use two sets (A and B), the impedance of each speaker must be 8 ohms or higher
Inputs/Outputs 5 x RCA audio inputs, including MM (moving magnet) / MC (moving coil) phono input
1 x Set of balanced 3-pin XLR inputs
1 x Preamp out / main in jacks
1 x Headphone jack
Power Requirements AC 120 V, 60 Hz
Power Consumption Normal: 350 W
Idling: 80 W
Dimensions (W x H x D) 17.1 x 5.4 x 18.3" (434.3 x 137.2 x 464.8 mm)
Weight 50 lb (22.7 kg)
View AllClose

Technical Specs

View AllClose

What's Included

View AllClose
Website Management Provided by Genacom