Wooden Camera Unified Baseplate (Sony FX6, Venice, Rialto, URSA Mini, Mini Pro, Mini Pro 12K)
Product Highlights:
- 15mm Rod Support / Correct Lens Height
- Vertical Rod Port (Lens Adapter Support)
- Two Quick Release Options
- Use with Bridgeplates, Gimbals, Etc.
- Center Camera Slot for Multiple Screws
- Anti-Twist, Non-Slip Rubber Surface
- Backward Compatible with Quick Dovetail
- Wooden Camera Unified Baseplate for URSA Mini, F55, F5
- Wooden Camera Unified Baseplate Core Unit (No Dovetails)
- Wooden Camera Unified Baseplate Camera Dovetail Plate for URSA Mini, F5, F55
- Wooden Camera Unified Baseplate Lower Quick Dovetail
- Limited 1-Year Manufacturer Warranty
- (2) 1/4-20 low profile screw
- (2) 3/8-16 low profile screw
Wooden Camera Unified Baseplate (Sony FX6, Venice, Rialto, URSA Mini, Mini Pro, Mini Pro 12K)
Wooden Camera 222200 Unified Baseplate (Sony FX6, Venice, Rialto, URSA Mini, Mini Pro, Mini Pro 12K) The Wooden Camera Unified Baseplate supports 15mm LWS rods at the correct lens height, and it offers a vertical 15mm rod port for incorporating the optional Unified Lens Adapter Kit. This Kit allows you to support different lens adapters from Wooden Camera, Metabones, and other brands.
The Baseplate includes the Core Unit, a Lower Quick Dovetail tripod plate on the bottom, and a Dovetail Camera Plate for the Blackmagic URSA Mini and Sony F55/F5. Other Unified Baseplate Dovetail Plates are also supported, allowing for quick swaps with a variety of cameras.
The Baseplate provides two quick release options. You can remove the Dovetail Camera Plate only and leave the Core Unit with your rod pair behind, or you can remove the Core Unit from the Lower Quick Dovetail, in which case you'll have a dovetail on the bottom of the Core Unit that's compatible with any 2060 Dovetail, Safety Dovetail, or Shoulder Rig.
The Dovetail Camera Plate features a long slot along its center that lets you secure it to the camera with multiple screws (included), which can be set up to 2.8" (70mm) apart. It also has a non-slip rubber surface that will prevent the camera from twisting.
The Dovetail Camera Plate has an ARCA Swiss standard dovetail compatible with many third-party products. It also has threaded 1/4"-20 threaded holes on the bottom for attaching to gimbals or other compatible tripod plates. The Lower Quick Dovetail has 1/4"-20 and 3/8"-16 threaded holes for attaching to tripod plates or ARRI standard bridgeplates, such as the Wooden Camera Unified Bridgeplates.
The Unified Baseplate can also be upgraded for VCT-14 compatible mounting options. Simply attach it to the optional Unified VCT Wedge Plate, which can then be mounted on the Unified VCT-14 Tripod Plate, also sold separately. The Unified Baseplate is backward compatible with Wooden Camera's original Quick Dovetails (Standard, DSLR, and Large).
Key Features
- Supports 15mm LWS rods at the correct lens height
- Offers a vertical 15mm rod port for incorporating the optional Unified Lens Adapter Kit (for lens adapter support)
- Includes the Core Unit, Lower Quick Dovetail tripod plate, and Dovetail Camera Plate
- Two quick release options—remove Core Unit or remove Dovetail Camera Plate
- Core Unit features a dovetail on the bottom, compatible with any 2060
- Dovetail, Safety Dovetail, or Shoulder Rig Dovetail Camera Plate features an ARCA Swiss standard dovetail and threaded holes for attaching to gimbals or other compatible tripods plates
- Lower Quick Dovetail offers threaded holes for attaching to tripod plates or ARRI standard bridgeplates
- Long slot along the center allows multiple screws to be attached to the camera, set up to 2.8" (70mm) apart
- Anti-twist, non-slip rubber surface
- Upgradable for VCT-14 compatible mounting options
- Additional Lower Quick Dovetail and Dovetail Camera Plates can be purchased for quick swap capability
- Backward compatible with original Wooden Camera Quick Dovetail
| Wooden Camera 222200 Specs: |
|---|
| Support Type |
Baseplate |
| Grip Type |
None |
| Camera Compatibility |
Canon EOS C200, Canon EOS C200B, Canon EOS C700 |
| Mounting |
|---|
| Rod Standard |
15 mm LWS / 60 mm Spacing |
| Accessory Mounting |
Sides: Multiple x 1/4"-20 Female Thread, Multiple x 3/8"-16 Female Thread
Base: 4 x 1/4"-20 Female Thread, 6 x 3/8"-16 Female Thread |
| Camera Mounting |
1/4"-20 Male Screw, 3/8"-16 Male Screw |
| Tripod Mounting |
1/4"-20 Female Thread, 3/8"-16 Female Thread |
| Rod Ports |
2 x 15 mm Rod Port |
| Shoe Mounting |
None |
| Rosettes |
None |
| General |
|---|
| Weight |
362.8 g (0.8 lbs) |
| Dimensions |
50.8 x 152.4 x 152.4 mm ( 2 x 6 x 6 in) |
| Packaging Info |
|---|
| Package Weight |
0.85 lb |
| Box Dimensions (LxWxH) |
5.4 x 5.3 x 1.75" |
