Whirlwind DA2 2-Channel 2-In/4-Out Audio Distribution Amplifier with Headphone Output & Individual Volume Controls
Product Highlights:
- Actively balanced line level XLR connectors
- Switchable headphone circuit
- 4 Outputs per each of the 2 Inputs
- Ground lifted outputs
- Whirlwind DA2 2-Channel 2-In/4-Out Audio Distribution Amplifier with Headphone Output and Individual Volume Controls
- Owner's Manual
- 2 Year Warranty
Whirlwind DA2 2-Channel 2-In/4-Out Audio Distribution Amplifier with Headphone Output & Individual Volume Controls
Whirlwind DA2 2-Channel 2-In/4-Out Audio Distribution Amplifier with Headphone Output & Individual Volume Controls The U.S.Audio/Whirlwind DA-2 is a 2-channel audio distribution amplifier featuring switchable 2 x 4 or 1 x 8 configurations, electronically balanced XLR outputs and active XLR inputs. This high-headroom, high-output unit is equipped with individual level controls and LED indicators for each output, and a separate headphone output with a dedicated volume control.
The DA-2 is a high-performance distribution amplifier, built with quality components, and available at a surprisingly moderate price point.
- 2-Channel rackmount distribution amplifier with 2-in/4-out configuration or mono-summed 1-in/8-out using Combine mode switch
- XLR electronically balanced line-level inputs and outputs with separate output level control knobs
- Headphone output with dedicated volume control
- Instrumentation grade input differential amplifiers with high 90dB Common Mode Rejection; tunable input impedance
- Individual red clip LED's with warning illumination at 3dB below clipping, green signal present indication
- 22dB headroom at unity gain, better than 74dB of isolation between outputs
- Rear panel ground lift switch
| Whirlwind DA2 Specs |
|---|
| Frequency Response |
20 Hz - 20 kHz, +/-.3dBm
3 Hz - 140 kHz, +/-3dBm |
| THD & Noise |
.004% @1 kHz
<.005%, 20 Hz - 20 kHz |
| Input Connectors |
2 x 3-pin XLR Female |
| Output Connectors |
8 x 3-pin XLR Male
1 x 1/4" TRS Headphone Out |
| Input Sensitivity/Impedance |
Impedance: 1Meg Ohm, Balanced |
| Maximum Input Level |
+23dBm, Unbalanced
+28dBm, Balanced |
| Maximum Output Level |
+22dBm, Unbalanced
+28dBm, Balanced |
| Signal-to-Noise Ratio |
97 dBm,+10 input, output level
89 dBm, 0 input, +10 output level
85 dBm @Unity Gain |
| Power Supply |
120VAC |
| Power Consumption |
.15 Amps max. @120VAC
.15 Amps max. @230VAC |
| Dimensions |
19 x 6 x 1.75" (482.6 x 152.4 x 44.45mm) |
| Weight |
6.5 lb (2.95 kg) |
| Packaging Info |
|---|
| Package Weight |
7.5 lb |
| Box Dimensions (LxWxH) |
21 x 9.5 x 4.5" |
