Sony LMD-A170 17" LCD Lightweight Full HD High-Grade Production Monitor
Product Highlights:
- 16.5" Diagonal Screen Size
- 1920 x 1080 Native Resolution
- Supports 1080/60p Video Signals
- 2x 3G/HD/SD-SDI Inputs
- SDI Inputs with Active Loop Through
- HDMI and Composite Inputs
- 178°/178° H/V Viewing Angle
- Waveform, Vectorscope, Focus Peaking
- Embedded Audio Decoding and Display
- 12V DC Input on 4-Pin XLR
Sony LMD-A170 17" LCD Lightweight Full HD High-Grade Production Monitor
- AC Power Cord
- AC Plug Holder
- Handle
- 4 x Fixing Screw for the Handle
- Monitor Feet
- CD-ROM
- Limited 3-Year Warranty
Sony 17" LCD Lightweight Full HD High-Grade Production Monitor
Sony LMD-A170 17" LCD Lightweight Full HD High-Grade Production Monitor
The Sony LMD-A170 17" LCD Production Monitor is a portable, 1920 x 1080 resolution monitor for on set, studio, and broadcast use. The monitor features an IPS LCD display with wide 178° horizontal and vertical viewing angles and provides 3G/HD/SD-SDI, HDMI, and composite inputs, which support NTSC/PAL, 720p, 1080i, and 1080p input signals with frames rates from 24p to 60p.
Sony LMD-A170 Specs |
Panel/Display |
Type |
IPS LCD |
Backlight Technology |
LED |
Screen Size (Diagonal) |
16.5" (42.2 cm) |
Effective Picture Size (H x V) |
14.40 x 8.10" (36.58 x 20.57 cm) |
Resolution |
1920 x 1080 |
Native Aspect Ratio |
16:9 |
Viewing Angle (H/V) |
178° / 178° |
Normal Scan |
0% scan |
Color Temperature |
D65, D93 |
Warm-Up Time |
Approx. 30 minutes |
Input |
Video Input |
2 x BNC, 3G/HD/SD-SDI 1 x HDMI, HDCP compliant 1 x BNC, Composite (NTSC/PAL) |
Audio Input |
1 x Stereo mini jack, -5 dBu 47 kohm or higher |
Power Input |
1 x XLR 4-pin (male), 12 to 17 VDC (output impedance 0.05 ohm or less) |
Remote Control |
1 x Parallel remote, RJ-45 modular connector 8-pin 1 x Serial remote, RJ-45 modular connector (ETHERNET, 10BASE-T/100BASE-TX) |
Output |
Video Output |
2 x BNC, 3G/HD/SD-SDI, Output signal amplitude: 800 mVp-p ±10% Output impedance: 75 ohm unbalanced 1 x BNC, Composite (NTSC/PAL) loop-though, 75 ohm automatic terminal function |
Audio Output |
1 x Stereo mini jack, audio monitor output 1 x Stereo mini jack, headphone output 1 x 1.0 W monaural speaker |
Video Signals |
Formats |
3G-SDI (10-bit 4:4:4 YCbCr and 4:4:4 RGB supported) 1080PsF 24/25/30 1080p 24/25/30/ 1080i 50/60 720p 50/60 3G-SDI (10-bit 4:2:2 YCbCr supported) 1080p 50/60 HD/SD-SDI 1080PsF 24/25 1080p 24/25/30 1080i 50/60 720p 24/25/30/50/60 575/50i (PAL) 480/60i (NTSC) HDMI 1080p 24/25/30/50/60 1080i 50/60 720p 50/60 640x480/60p 576/50p 480/60p 575/50i (PAL) 480/60i (NTSC) Note: 1080/25PsF, 30PsF are displayed as 1080/25PsF, 30PsF on the screen if the payload ID is added to the video signal, or displayed as 1080/50i, 60i if the ID is not added. |
PC Signal Compatibility |
HDMI input: 640 x 480: 25.175 MHz, fH 31.5 kHz, fV 60 Hz 1280 x 768: 68.25 MHz, fH 47.4 kHz, fV 60 Hz 1280 x 1024: 108 MHz, fH 64 kHz, fV 60 Hz 1360 x 768: 85.5 MHz, fH 47.7 kHz, fV 60 Hz 1440 x 900: 88.75 MHz, fH 55.5 kHz, fV 60 Hz 1680 x 1050: 119 MHz, fH 64.7 kHz, fV 60 Hz |
General |
Power |
100 to 240 VAC, 0.5 to 0.4 A, 50/60 Hz 12 to 17 VDC (4-pin XLR) |
Power Consumption |
Approx. 49 W (max.) Approx. 42 W (average power consumption in the default status) |
Inrush Current |
Maximum possible inrush current at initial switch-on (voltage changes caused by manual switching): 45 a peak, 5 A r.m.s (240 VAC) Inrush current after a mains interruption of 5 seconds (voltage changes caused at zero-crossing): 15 A peak, 3 A r.m.s. (240 VAC) |
Operating Temperature |
32 to 95°F (0 to 35°C) Recommended temperature: 68 to 86°F (20 to 30°C) |
Operating Humidity |
30 to 85% (no condensation) |
Storage Temperature |
-4 to 140°F (-20 to 60°C) |
Storage Humidity |
0 to 90% |
Pressure Tolerance |
700 hPa to 1060 hPa |
VESA Mounting |
100 x 100 mm |
Packaging Info |
Dimensions (H x W x D) |
Without feet: 11.4 x 16.5 x 2.8" (288.8 x 420.2 x 70.2 mm) With feet: 12.3 x 16.5 x 6.5" (311.3 x 420.2 x 165.0 mm) |
Weight |
Approx. 10.8 lb (4.9 kg) |