Sony 1080p 2/3” CMOS SMPTE Fiber Portable Camera Head Only
Product Highlights:
- 1080p HD/SD Optical Fiber Broadcast Camera
- 4K Output from CCU (optional)
- Supports Fiber Cable Runs Up to 6,562 ft
- 2/3" Type CMOS Sensor
- F12 Sensitivity for 1080/59.94i, -62dB
- Global Shutter eliminates “Jello effect” and banding noise
- Large Lens Support via Optional Adapters
- ND/CC Dual Optical Servo Filters
- Records 1080p59.94/50, 720p, 1080PsF
- 16-Bit A/D Converter
- Works with HDCU-3100 SMPTE Fiber CCU
- 4K Output option from CCU (ask Omega Sales)
Sony HDC-3100L 1080p 2/3” CMOS SMPTE Fiber Portable Camera Head Only
Sony HDC-3100L: 1080p 2/3” CMOS SMPTE Fiber Portable Camera Head Only
Raising the standard in creative flexibility
The HDC-3100 system camera brings new levels of creative flexibility and portability to live production environments. Enjoy premium HD pictures plus the convenience of optical fibre transmission.
Next generation imaging
Capture premium pictures with the world’s first 2/3-inch HD CMOS sensor with global shutter technology that eliminates the ‘jello effect’ and banding noise. This allows the HDC-3100 to capture pristine images with low noise and excellent sensitivity (F12 at 1080/59.94i or F13 at 1080/50i).
More format flexibility
The HDC-3100 can output 3G-SDI signals in a range of formats right up to 1080/50p, with 4K available via the CCU’s 12G-SDI and Quad 3G-SDI interfaces. So you can benefit from maximum production convenience – and your viewers can enjoy premium picture quality.
Optical fibre transmission
The HDC-3100 supports optical fibre transmission as standard, with a SMPTE-standard interface for connection with associated HDCU-3100/HDCU-2000 series Camera Control Units.
Get the look
Broaden your creative possibilities and achieve exactly the look you want in any shooting situation. Low-key Saturation ensures rich, vibrant colours in low-light areas. Powerful gamma functions give absolute control over fine-tuning tonal values, contrast and detail.
**SPECIAL ORDER.
NO RETURNS**
| Sony HDC-3100L Specs |
|---|
| Power requirements |
AC 240 V, 1.05 A (max.), DC 240 V, 1.05 A (max.) |
| Operating temperature |
20°C to +45°C (.4°F to 113°F) |
| Storage temperature |
20°C to +60°C (.4°F to 140°F) |
| MassApprox. |
4.8 kg (10 lb 9 oz) |
| Imager |
2/3 inch type CMOS sensor with global shutter |
| Method |
3-CMOS, RGB |
| Sensitivity |
F12 with 1080/59.94i, F13 with 1080/50i (at 2,000 lx with 89.9% reflectance) |
| Signal-to-noise ratio |
-62 dB or higher |
| Horizontal resolution |
1,000 TV lines (at center of screen), 5% or higher modulation |
| Geometric distortion |
Negligible (not including lens distortion) |
| Spectrum system |
F1.4 prism |
| Built-in filters |
1: CLEAR, 2: 1/4ND, 3: 1/16ND, 4: 1/64ND |
| CCU |
Electro-optical connector (LEMO 3K.93C connector) (x1) |
| Lens |
12-pin (x1) |
| VF |
20-pin (x1) |
| Mic 1 In |
XLR 3-pin, female (x1) |
| Audio In CH1, CH2 |
XLR 3-pin, female (x1 each); AUDIO switch for MIC: –60 dBu
(can be selected up to –20 dBu in the menu),
balanced ; AUDIO switch for LINE: 0 dBu, balanced |
| Intercom 1, Intercom 2 |
XLR 5-pin, female (x1) |
| Earphone |
4-pole mini jack (x1), (2-pole mono, 3-pole stereo,
4-pole CTIA standard, 4-pole OMTP standard) |
| DC In |
XLR 4-pin (x1), DC 10.5 to 17 V |
| DC Out |
4-pin (x1), DC 10.5 to 17 V, max. 0.5 A*¹, 2-pin (x1),
DC 10.5 to 17 V, Max. 2.5 A*; BNC (x1);
No (*This may be limited by the imposed load or inputs) |
| SDI MONI |
BNC (x1) |
| Test Out |
BNC (x1) |
| Prompter/Genlock |
BNC (x1), PROMPTER 1 Vp-p, 75 Ω, GENLOCK HD: SMPTE ST274,
tri-level sync, 0.6 Vp-p,
75 Ω, SD: Black burst (NTSC: 0.286 Vp-p, 75 Ω/PAL: 0.3 Vp-p, 75 Ω) |
| Prompter2 |
No |
| RET CTRL |
6-pin (x1) |
| Remote |
8-pin (x1) |
| Tracker |
12-pin (x1) |
| Crane |
No |
| USB |
USB 2.0 Type A 4-pin (x1) (for connecting USB drive) |
| Network Trunk |
No |
