Sony 1/2" HD 3CMOS Remote PTZ Camera
Product Highlights - 1/2" Exmor Full HD 3CMOS Sensor
- 14x Optical Zoom (5.8-81.2mm, F1.9-2.8)
- Low Light Rating - 4 lux F1.9, +24 db
- Simultaneous HD-SDI and SD Output
- Camera and Image Adjustment Menus
- Remote Pan, Tilt, and Zoom
- Up to 16 Preset Positions
- Ceiling, Desktop, or Tripod Mount
- Remotely Control up to 112 Units
- RS-232C/RS-422 (VISCA) and IR Remote
Download Brochure
Sony BRC-H900 1/2" HD 3CMOS Remote PTZ Camera
- IR Remote Commander Unit (Requires 2 x AA Batteries, Not Included)
- AC Power Adapter
- AC Power Cord
- DC Cord Secure Connection Attachment
- RS-422 Connector Plug
- Ceiling Bracket A
- Ceiling Bracket B
- Wire Rope
- 7 x Screws (M3 x 8)
- Screws (M4 x 8)
- Operating Instructions
Sony 1/2" HD 3CMOS Remote PTZ Camera
Sony BRC-H900 - 1/2" HD 3CMOS Remote PTZ Camera
The Sony BRC-H900 is an HD video PTZ camera unit. The unit consists of the pan/tilt module and the camera head and lens. The BRC-H900 is switchable between 59.98 and 50 Hz standards (NTSC and PAL), and simultaneously outputs both HD/SDI and SD video. This feature makes it well suited for facilities that are planning to transition to HD, as you can shoot SD now, and change over to HD by simply using a different output on the unit. The camera head produces HD video in 1080i or 720p, using the 1/2" Exmor Full HD 3CMOS sensor and a 5.8-81.2mm / f/1.9-f/2.8 optical zoom lens.
It features a sensitivity of 4-lux at F1.9 with gain at + 24 db, for low light shooting capability. An extensive image-control menu tree is accessible by remote, allowing for fine-tuning and optimizing of the image. The BRC-H900 has a slot for a single expansion card. Optional cards are available for adding additional HD/SD-SDI output, additional analog SD output, HD Optical Multiplex capability, or IP control. The BRC-H900 unit installs on a desk or a tripod, or mounts onto a ceiling using the included hardware. Tripod mounting is possible by using one of the two 1/4"-20 receivers in the base of the unit. The camera also comes with an included Image Flip Option, which simplifies setting up the camera when mounted upside down. You can program the camera with up to 16 preset positions, which is useful for repetitive events and productions.
Remote operation is a major component of the BRC-H900's design. The included Sony Remote Commander utilizes IR to control the unit, which also has a built-in 3-position IR selector switch, allowing individual control of adjacent units. Additionally the optional Sony RM-BR300 remote control unit can control the BRC-H900 when connected to the unit's built-in RS-232C or RS-422 ports using Sony's VISCA protocol. The RM-BR300 can individually control up to 7 cameras daisy chained together. Installation of an optional IP controller card in the expansion slot allows for remote operation over IP. The small size and remote operation capabilities of the BRC-H900 allow for placement where a manually operated camera and operator could not go. It features remote control operation of pan, tilt, zoom, focus, iris, shutter speed, and gain. The BRC-H900 is suitable for use in the corporate boardroom, video studio, auditorium, house of worship, government buildings, and for remote and e-learning applications.
| Camera |
|---|
| Sensor |
1/2" Exmor 3CMOS Image Sensor |
| Resolution |
Approx. 2.07 Megapixels |
| Signal System |
60 Hz
1080/59.94i
720/59.94p
NTSC
50 Hz
1080/50i
720/50p
PAL |
| Horizontal Resolution |
> 1000 TV Line (HD-SDI Output) (Center) |
| Minimum Illumination |
4 lux (50 IRE, f/1.9, +24dB) |
| Shutter Speed Range |
1/8000 to 1/60
1/8000 to 1/50 |
| Gain |
Auto, Manual
-3 to 24 dB |
| White Balance |
Settings
Auto / Outdoor / Indoor
Method
One-push / Manual |
| Gamma Curve |
STD 1
STD 2
STD 3
STD 4
CINE 1
CINE 2
CINE 3
CINE 4 |
| Image Stabilization |
SteadyShot
On / Off |
| Image Flip |
Selectable On / Off |
| Video Signal-to-Noise Ratio |
50 dB |
| Sync Input |
External
1 x BNC 75 ? |
| Synchronization System |
Internal / External |
| Output Format/Interface |
|---|
| HD |
SDI
1 x BNC
HD / SD Switchable
RGB/Component
1 x D-Sub 15 Pin
Component (Y/Pb/Pr)
RGB
HD
Bi-Level VD
Tri-Level SYNC |
| SD |
1 x BNC Composite
1 x S-Video Y/C |
| Camera Control |
Mini DIN 8 Pin
1 x RS-232C (VISCA IN )
Mini Din 8 Pin
1 x RS-232C (VISCA OUT)
Connector Plug 9 Pin
1 x RS-422 (VISCA IN / OUT) |
| Optical System |
|---|
| Lens |
Focal Length
f=5.8-81.2mm (f/1.9-f/2.8)
Zoom Ratio
14x Optical Zoom
Minimum Object Distance
31.5" (80 cm)
Horizontal Viewing Angle
59.6® at the Wide End of the Lens
Focusing System
Auto / Manual |
| Mechanical Specification |
|---|
| Pan/Tilt |
Pan Angle
-170 to +170®
Tilt Angle
-30 to +90®
Pan/Tilt Speed
0.22 to 60®/sec
Preset Positions
16 |
| Presets |
Number of Programmable Position Presets
16
Included
Presets 1-6 available using the included Remote Commander
Optional
Presets 7-16 require the use of the optional RM-BR300 |
| Tally Light |
Quantity
2
Location
1 x Front
1 x Rear |
| Expansion Slot |
1 x Available Slot
Card Options
HD/SD-SDI Output Card - BRBK-HSD2
Analog SD Output Card - BRBK-SA1
HD Optical Multiplex Card - BRBK-SF1
IP Control Interface Card - BRBKIP10 |
| Mounting Options |
|---|
| Mounting |
Less than ±15® to the horizontal surface |
| Ceiling Mount Bracket |
2 x Brackets Included
Note: When installing to ceiling or shelf, use included wire rope for safety, and confirm that ceiling or shelf can support 132 lb (60 kg) |
| Desktop Mounting |
Install on a solid level flat surface, ensure camera does not fall |
| Tripod Mount |
2 x 1/4"-20 Threaded Female Receiver |
| General |
|---|
| Temperature |
Operating Temperature
32 to 104®F (0 to 40®C)
Storage Temperature
-4 to 140®F (-20 to 60®C) |
| Power Requirements |
10.8 to 13.2 VDC |
| Power Consumption |
Without Optional Cards
28.8 W
With Optional Cards
34.2 W |
| Dimensions (WxHxD) |
7.83 x 10.25 x 9.38" (20 x 26 x 24 cm) |
| Weight |
11 lb (5.0 kg) |
