Shure FP33

The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.

Shure FP33

(No reviews yet) Write a Review
  • Shure FP33
  • Shure FP33
  • Shure FP33
  • Shure FP33
SKU:
RENT-FP33-4528
Manufacturer Part:
Weight:
6.00 LBS
$20.00

Description

Shure 3-Channel Stereo Mixer

 

3-Channel Stereo Mixer

Product Highlights:
- Designed for Remote Production/Recording
- 3 Mic/Line Level XLR Inputs
- Stereo XLR Outputs
- 1/8" Stereo Tape Output
- 1/8" Stereo Monitor Input
- 1/4" and 1/8" Headphone Outputs
- Level/Pan Control per Channel
- 12V and 48V Phantom Power Modes
- 8-Hour Battery Life on Two 9V Batteries
- Accepts PS20/PS20E Power

Download User Manual

 

 

 

Shure 3-Channel Stereo Mixer

 

Shure FP33 - 3-Channel Stereo Mixer
The Shure FP33 3-Channel Stereo Mixer is a field mixer rugged enough to handle the elements and flexible enough for professional working environments. It is suitable for electronic news gathering (ENG), field production (EFP), film, television and recording for sound design. The FP33 features 3 XLR inputs and left/right XLR outputs. The inputs and outputs can be switched between mic and line level signal. There are additional 3.5mm Monitor and Tape connections as well as both 1/4" and 3.5mm headphone outputs.

NOTE: In most cases "stock" manufacturer images and descriptions are used in this catalog. Actual Rental items may vary slightly.

 

Connectivity
Inputs 3 x Balanced XLR inputs
Output 2 x Balanced XLR outputs (1 x L/R)
Headphone Outputs 1 x 1/4" TRS stereo
1 x 3.5mm TRS stereo mini
ALT I/O 1 x 3.5 mm TRS stereo mini - Monitor In
1 x 3.5 mm TRS stereo mini - Tape Out
Link Input/Output "MIX BUS" connection: 3-Pin mini-XLR connector
Performance
Input Impedance Mic: 1kΩ internal; use with 19 to 600Ω source; -10 dBV clip level
Line: 50kΩ internal; use with 10kΩ source; +36 dBV clip level
Monitor: 10kΩ internal; use with 1kΩ source; +21 dBV clip level
Output Impedance Mic: 1Ω internal; use with Low-Z source; -31 dBV clip level
Line: 150Ω internal; use with 600Ω source; +18 dBm clip level
Tape: 2.2kΩ internal; use with >10kΩ source; +3 dBV clip level
Headphones: 300Ω internal; use with 8 to 200Ω source; +11 dBV clip level
Gain Low-Z Mic Input: Line 78 dB, Mic 28 dB, Headphone 89 dB, Tape 66 dB
Line: Line 28 dB, Mic -22 dB, Headphone 39 dB, Tape 16 dB
Monitor: Headphone 11 dB
Frequency Response 20 to 20,000 Hz ± 2.0 dB (channel controls centered)
THD 0.25% THD @ +4dBm output, 50 to 20,000 Hz
Equivalent Input Noise -127 dBV with 150Ω source, 20 to 20,000 Hz
Output Noise Master level fully CCW: -100 dBV, 20 to 20,000 Hz
Master level fully CW: -80 dBV, 20 to 20,000 Hz
Common Mode Rejection Ratio 65 dB @ 100 Hz, -20 dBV input
Polarity Mic/Line to Mix Bus: inverting
all other signal paths are non-inverting
Overload Protection Shorted outputs, even for prolonged periods, cause no damage. Microphone inputs of up to 3 Vrms cause no damage. The Line and monitor inputs can withstand signals of up to 30 Vrms.
Output Clipping Level -18 dBm @ line output into 600Ω
Oscillators Tone Oscillator: 1 kHz ±10%
Slate Tone Oscillator: 400 Hz ±10%
Limiter Threshold: adjustable; 0 dBm to +15 dBm
Attack time: 1 mS
Release time constant: selectable; 100 mS or 1 second
Indicator: green when limiting by 1 dB or more
Microphone Power 12V Phantom through matched 680Ω
48V Phantom: through matched 6.8kΩ
12V T (A-B): through matched 180Ω
General
LED Indicators Input Channel Bi-Color LEDs:
Green: Signal presence; visual indication of mix level
Red: 6 dB below clipping level

Output Peak/Limiter Bi-Color LEDs:
Green: Output being limited by 1 dB or more
Red: Output peak threshold reached; factory set at +17 dBm; user adjustable from 0 to 17 dBm
VU Meter VU Left/Right Channel Output Level Meters: 0 VU preset at +4 dBm output level
Operating Temperature Operating: 0 to 60° C (32 to 140° F)
Storage: -40 to 85° C (-40 to 185° F)
Power Internal: two 9V alkaline batteries
External: 12-30 VDC to DC In jack; non-polarized
Current Drain Approximately 41 mA (idle) at 18V
Battery Life 8 hours minimum, typical
Dimensions (H x W x D) 2.26 x 7.24 x 6.33" (58 x 184 x 161 mm)
Weight 3.5 lb (1.6 kg)
View AllClose

Technical Specs

View AllClose

What's Included

View AllClose
Website Management Provided by Genacom