NovaStar MCTRL4K 4K 16 outputs Synchronous 60Hz LED Sender Box
Product Highlights:
- 1 × DP 1.2 input and 1 × HDMI 2.0 input, resolutions up to 8.8 million pixels per input
- 2 × D-DVI inputs, total resolutions up to 8.3 million pixels.
- 16 × Neutrik Gigabit Ethernet ports and 4 × 10G optical ports for output.
- Supported video bit depths: 8-bit, 10-bit and 12-bit.
- Supports both mosaic and multi-card working modes for dual-link DVI inputs.
- Supports HDR function, both in HDR10 and HLG standards.
- Supports individual Gamma adjustment for RGB when the bit depth of input source is 10-bit or 12-bit.
**SPECIAL ORDER.
NO RETURNS**
NovaStar MCTRL4K 4K 16 outputs Synchronous 60Hz LED Sender Box
The MCTRL4K is a 4K×2K independent controller developed by NovaStar. With up to 3840×2160@60Hz loading capacity of a single unit, it can support any custom resolution within this range as required, thus meeting the on-site configuration requirements of super-long or super-large LED displays.
In multi-card mode, the MCTRL4K can be used as two independent controllers, making the images of two input sources perfectly displayed on the screen.
What's more, the MCTRL4K supports HDR function and can work with A8s/A10s to greatly enhance the image quality of the screen, presenting more vivid and clearer images.
The MCTRL4K is mainly applied to concert control centers, live events, security monitoring, Olympic Games and various sports centers.
| Input |
|---|
| DP 1.2 |
DP 1.2 connector |
| HDMI 2.0 |
HDMI 2.0 connector |
Dual DVI-D1
Dual DVI-D2 |
Dual-link DVI connectors |
| Output |
|---|
| 1-16 |
16 x Neurtik (NE8FBH) Gigabit Ethernet outputs |
| OPT1-4 |
4x Fiber optical outputs
OPT1 corresponds to Ethernet ports 1-8, while OPT2 corresponds to Ethernet ports 9-16
OPT3 serves as the backup for OPT1, while OPT4 serves as the backup for OPT2 |
| Control |
|---|
| Ethernet |
For PC connection |
| USB In |
Input port for cascading devices, or for PC connections |
| USB Out |
Output port for cascading devices |
| Genlock |
|---|
| In |
Genlock type: Blackburst
It is the Genlock synchronization signal which is used to ensure synchronization
between the LED screen display and external Genlock source |
| Loop |
Genlock loop output |
| Power Connector |
|---|
| AC 100-240 V-50/60Hz |
AC power input |
