Lynx Technik AG yellobrik 12Gb SDI to Single-Mode Fiber Optic Transmitter

The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.

Lynx Technik OTX 1410 AG yellobrik 12Gb SDI to Single-Mode Fiber Optic Transmitter

(No reviews yet) Write a Review
  • Lynx Technik OTX 1410 AG yellobrik 12Gb SDI to Single-Mode Fiber Optic Transmitter
SKU:
LXT-OTX1410-90
Manufacturer Part:
O TX 1410
Weight:
2.00 LBS
Shipping:
Calculated at Checkout
$745.75
Availability:
Special Order, subject to availability
Quantity: 

Description

Lynx Technik AG yellobrik 12Gb SDI to Single-Mode Fiber Optic Transmitter (LC/PC)

 

(LC/PC)

Product Highlights:
- Supports 12G, 6G, 3G and 1.5G SDI video inputs
- 3Gbit Level A and Level B (support for all formats)
- Auto reclocking 1.5Gbit / 3Gbit / 6Gbit / 12Gbit
- Error free optical transmission
- Reclocked SDI loop out connection
- LC/PC connection
- Singlemode fiber connection
- Up to 10km (6.2 miles) @ 3Gbit/s (singlemode)
- Hot swappable and hot pluggable

**SPECIAL ORDER.
NO RETURNS**

 

 

 

Lynx Technik AG yellobrik 12Gb SDI to Single-Mode Fiber Optic Transmitter (LC/PC)

 

Lynx Technik AG yellobrik 12Gb SDI to Single-Mode Fiber Optic Transmitter (LC/PC)
The OTX 1410 is a compact SDI to fiber optic transmitter designed to combat the restrictions involved with the distribution of uncompressed, high bandwidth, broadcast quality video signals over long distances.

When paired with the fiber optic to SDI receiver (e.g. yellobrik ORX 1400) you have a very cost-effective optical transmission / receiver system for signals up to 12Gbit/s (4096x2160 @ 60Hz), while preserving full uncompressed quality.

Operation of the OTX 1410 is fully automatic. The SDI video format is automatically detected, reclocked and then transmitted over the fiber optic connection. A reclocked electrical SDI output is also provided.

The OTX 1410 supports 12G, 6G, 3G and 1.5G SDI video standards

 

SDI Video 1 x SDI video input and 1 x SDI reclocked loop output
75 Ohm BNC connectors
SMPTE 2082-1, SMPTE 2081-1, SMPTE 424M, SMPTE 292M
Multi-standard operation from 270Mbit/s to 3Gbit/s
Multirate reclocking: 1.5Gbit - 3Gbit - 6Gbit - 12Gbit
Automatic cable EQ
260m @ 1.5Gbit/s, 150m @ 3Gbit/s (Belden 1694A cable)
80m @ 12Gbit/s, 6Gbit/s (Belden 4794R cable)
Fiber Optic 1 x fiber optic output
SMF (singlemode) using LC/PC connection
SMPTE 297M - 2006
Wavelength 1310nm, typical Optical power -3dBm
TX active LED on side of module
Max. distance approx. 10km (6.2 miles) @ 3Gbit/s (Singlemode)
Physical Power: +12VDC @ 2.2W nominal - (supports 7 - 24VDC input range)
Size: 5.51" x 1.65" x 0.86" including connectors
Weight: 4.4oz
Ambient: 41 - 104°F - 90% Humidity (non condensing)
View AllClose

Technical Specs

View AllClose

What's Included

View AllClose