Lynx Technik AG yellobrik 12Gb Single-Mode Fiber Optic/SDI Transceiver (6.2 mi)
(6.2 mi)
Product Highlights:
- SDI fiber receiver and transmitter in single package
- Supports 12G, 6G, 3G and 1.5G SDI video standards
- 3Gbit Level A and Level B (support for all formats)
- Auto reclocking 1.5Gbit / 3Gbit / 6Gbit / 12Gbit
- Error free optical transmission
- LC/PC duplex connection
- Singlemode fiber connection
- Up to 10km (6.2 miles) @ 3Gbit/s (singlemode)
- Hot swappable and hot pluggable
**SPECIAL ORDER.
NO RETURNS**
Lynx Technik AG yellobrik 12Gb Single-Mode Fiber Optic/SDI Transceiver (6.2 mi)
Lynx Technik AG yellobrik 12Gb Single-Mode Fiber Optic/SDI Transceiver (6.2 mi)
The OTR 1410 is a Fiber / SDI transmitter and receiver combined in a single self-contained package. It is a convenient and cost-effective solution to combat the restrictions involved with the distribution of uncompressed, high bandwidth, broadcast quality video signals over long distances.
Each OTR 1410 transceiver has an independent transmitter and receiver channel, which provides an effective solution for any SDI signal up to 12Gbit/s (4096x2160 @ 60Hz), while preserving full uncompressed quality.
Operation of the receiver and transmitter is automatic. For transmission, the SDI video format is automatically detected, reclocked and then transmitted over the fiber optic TX connection. For reception, the optical SDI video input signal on the RX connection is automatically detected, reclocked and provided on the SDI output connection.
The OTX1410 supports 12G, 6G, 3G and 1.5G SDI video standards
| SDI Video |
1 x SDI video input, 1 x SDI output
75 Ohm BNC connectors
SMPTE 2082-1, SMPTE 2081-1, SMPTE 424M, SMPTE 292M
Multi-standard operation from 1.5Gbit/s to 12Gbit/s
Multirate reclocking: 1.5Gbit - 3Gbit - 6Gbit - 12Gbit
Automatic cable EQ
260m @ 1.5Gbit/s, 150m @ 3Gbit/s (Belden 1694A cable)
80m @ 12Gbit/s, 6Gbit/s (Belden 4794R cable) |
| Fiber Optic |
1 x fiber optic input, 1 x fiber optic output
SMF (singlemode) using LC/PC connection
SMPTE 297M - 2006
Transmitter: 1310nm, typical Optical power -3dBm
Receiver: 1260nm - 1620nm (-2dBm to -10dBm)
Max. distance approx. 10km (6.2 miles) @ 3Gbit/s (Singlemode)
TX active and RX active LEDs on side of module |
| Physical |
Power: +12VDC @ 2.2W nominal - (supports 7 - 24VDC input range)
Size: 5.51" x 1.65" x 0.86" including connectors
Weight: 125g (4.4oz)
Ambient: 41 - 104°F - 90% Humidity (non condensing) |
