Lynx Technik AG yellobrik 12Gb Single-Mode Fiber Optic to SDI Receiver (LC/PC)
(LC/PC)
Product Highlights:
- Supports 12G, 6G, 3G and 1.5G SDI video standards
- 3Gbit Level A and Level B (support for all formats)
- Auto reclocking 1.5Gbit / 3Gbit / 6Gbit / 12Gbit
- Error free optical transmission
- Two reclocked SDI outputs
- LC/PC connection
- Singlemode fiber connection
- Input range 1260nm to 1620nm
- Hot swappable and hot pluggable **SPECIAL ORDER.
NO RETURNS**
Lynx Technik AG yellobrik 12Gb Single-Mode Fiber Optic to SDI Receiver (LC/PC)
Lynx Technik AG yellobrik 12Gb Single-Mode Fiber Optic to SDI Receiver (LC/PC)
The ORX 1400 is a compact SDI to fiber optic Receiver designed to combat the restrictions involved with the distribution of uncompressed, high bandwidth, broadcast quality video signals over long distances.
When paired with the fiber optic to SDI transmitter (e.g. yellobrik OTX 1410) you have a very cost-effective optical transmission / receiver system for signals up to 12Gbit/s (4096x2160 @ 60Hz), while preserving full uncompressed quality.
Operation of the ORX 1400 is fully automatic. The SDI video format is automatically detected, reclocked and provided on two SDI output connections.
The ORX1400 supports 12G, 6G, 3G and 1.5G SDI video standards.
| Fiber Input | 1 x fiber optic input
Simplex LC/PC connection
SMPTE 297M - 2006
Input range (wavelength) 1260nm to 1620nm
RX sensitivity -2dBm to -10dBm
RX active LED on side of module
SMF (Singlemode) fiber
Hot pluggable |
| SDI Outputs | 2x SDI video on 75 Ohm BNC connector
SMPTE 2082-1, SMPTE 2081-1, SMPTE 424M, SMPTE 292M
Multi-standard operation from 1.5Gbit/s to 12Gbit/s
Multirate reclocking: 1.5Gbit - 3Gbit - 6Gbit - 12Gbit |
| Physical | Power: +12VDC @ 2.2W nominal - (supports 7 - 24VDC input range)
Size: 5.51" x 1.65" x 0.86" including connectors
Weight: 4.4oz
Ambient 41 - 104°F - 90% Humidity (non condensing) |
