Power Requirements: |
DC 12 V (AC adaptor supplied) DC 42 - 57 V (PoE+ power supply) |
Current consumption: |
1.8 A (AC adaptor supplied) 0.6 A (PoE+ power supply) |
Ambient operating temperature: |
0 °C to 40 °C (32 °F to 104 °F) |
Storage Temperature: |
-20 °C to 50 °C (-4 °F to 122 °F) |
Allowable humidity ranges: |
20% to 90% (no condensation) |
Mass: |
Approx. 3.1 kg (6.83 lb) [Including mount bracket] |
Dimensions (W x H x D): |
180 mm x 228 mm x 234 mm (7-3/32" x 9" x 9-3/16") (excluding protrusions, cable cover, direct ceiling mount bracket) |
Controller supported: |
AW-RP120, AW-RP50, AK-HRP200 |
Input: |
Input connector: |
DC 12 V IN, G/L IN (BNC) BBS (Black Burst Sync), tri-level sync supported Locking to a color subcarrier is not possible with BBS. PoE+ (IEEE802.3at standard) |
Output: |
HD/SD SDI OUT: |
SMPTE424/SMPTE292/SMPTE259 standards 75 Ω (BNCx1) |
VIDEO OUT: |
NTSC/PAL 1.0 V [p-p]/75 Ω (BNCx1) |
INPUT / OUTPUT: |
LAN: |
LAN connector for IP control (RJ-45) |
RS-422: |
CONTROL IN RS-422A (RJ-45) |
MIC/LINE input: |
3.5 mm stereo mini jack Input impedance: High impedance During MIC input -- Supported mic: Stereo mic (plug-in power, on/off switching via menu) Supply voltage: 2.5 V ± 0.5 V, Mic input sensitivity: Approx. -40 dBV ± 3 dBV (0 dB=1 V/Pa, 1 kHz) During LINE input -- Input level: Approx. -10 dBV ±3 dBV |
FUNCTIONS & PERFORMANCE: |
Imaging Sensors: |
1/2.86-type Full-HD 3MOS |
Lens: |
Motorized 20 zoom, F1.6 to F3.4 (f=4.5 mm to 90 mm; 35 mm equivalent: 32.13 mm to 642.5 mm) |
Focus: |
Switching between auto and manual |
Focus Distance: |
Entire zooming range: 800 mm (2.62 ft) Wide end: 400 mm (1.31 ft) |
Color Separation Optical System: |
3MOS |
Minimum Illumination: |
2 lx (50%, F1.6, 36 dB) |
Horizontal Resolution: |
1000 TV lines Typ (Center area) |
Gain Selection: |
Auto, 0 dB to 36 dB |
Frame mix: |
0 dB, 6 dB, 12 dB, 18 dB, 24 dB |
Electronic Shutter Speed: |
59.94p/59.94i: |
1/100, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 |
29.97p: |
1/30, 1/60, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 |
23.98p: |
1/24, 1/60, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 |
50p/50i: |
1/60, 1/120, 1/250, 1/500,1/1000, 1/2000, 1/4000, 1/10000 |
25p: |
1/25, 1/60, 1/120, 1/250, 1/500, 1/1000, 1/2000,1/4000,1/10000 |
Synchro scan: |
59.94 Hz:60.15 Hz to 642.21 Hz, 50 Hz:50.15 Hz to 535.71 Hz |
Gamma: |
HD, SD, FILMLIKE1, FILMLIKE2, FILMLIKE3, 0.30 to 0.75 (Manual setting) |
White Balance: |
AWB A, AWB B, ATW, 3200K, 5600K, VAR (2000K to 15000K) |
Chroma Amount Variability: |
OFF, -99% to 40% |
Scene File: |
Scene1, Scene2, Scene3, Scene4 |
Output Format: |
1080/59.94p,1080/29.97p,1080/23.98p, 1080/59.94i,1080/29.97PsF,1080/23.98PsF, 720/59.94p,480/59.94p(i),1080/50p,1080/25p, 1080/50i,80/25PsF,720/50p,576/50p(i) |
Synchronization System: |
Internal/External synchronization (BBS/Tri-level sync) |
Installation method: |
Stand-alone (Desktop) or suspended (Hanging) |
Camera/pan-tilt head control: IP Connecting Cable: |
When connecting through a hub: LAN cable (category 5e or above, straight cable), max. 100 m (328 ft) When a hub is not used: LAN cable (category 5 or above, crossover cable), max.100 m (328 ft) |
Camera/pan-tilt head control: RP Connecting Cable: |
LAN cable (category 5 or above, straight cable), max. 1000 m (3280 ft) RS-422A, AW series protocol |
Pan-tilt operation speed: |
0.08°/s to 60°/s |
Panning range: |
+/-175° |
Tilting range: |
-30° to 210° |
Quietness: |
NC35 or less |