| Modes of Operation |
Four independent 2K, HD, or SD video processors
One 4K, UltraHD, 2K, HD, or SD video processor |
| Dynamic Range / Color Gamut Input |
SDR BT.709 100 Nits
PQ BT.2020 1000 Nits
PQ P3D65 1000 Nits
Hybrid Log Gamma BT.2100
Sony S-Gamut3/S-Log3
ARRI Log C Wide Gamut
Panasonic V-log
RED Log3G10/Wide Gamut
Canon Log 2
Canon Log 3 |
| Output Formats |
SDR BT.709 100 Nits
PQ BT.2020 1000 Nits
Hybrid Log Gamma BT.2100
Sony S-Gamut3/S-Log3 |
| HDR Conversion |
HDR to HDR
HDR to SDR
SDR to HDR |
| Colorimetry |
Supports BT.709 and BT.2020 |
| Video Formats |
(4K) 4096 x 2160p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
(UltraHD) 3840 x 2160p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
(UltraHD) 3840 x 2160PsF 23.98, 24, 25, 29.97, 30
(2K) 2048 x 1080p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
(HD) 1920 x 1080p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
(HD) 1920 x 1080PsF 23.98, 24, 25, 29.97, 30
(HD) 1920 x 1080i 50, 59.94, 60
(HD) 1280 x 720p 50, 59.94, 60
(SD) 625i 50
(SD) 525i 59.94
YCbCr, 4:2:2, 10-bit |
| Video Input Digital |
4 x 3G-SDI inputs, 4 x BNC
4 x 3G-SDI inputs, 4 x Fiber or HD-BNC (optional SFP modules)
SFP fiber modules, 3G-SDI, dual LC, single LC, or single SC, SMPTE-297
SFP fiber module, 12G/6G-SDI, dual LC, SMPTE-297
SFP coax module, 12G/6G-SDI, dual HD-BNC
12G/6G/3G/HD/SD, SMPTE-259/292/424/2081/2082
Single Link 12G/6G-SDI (with optional SFP module)
Quad Link 3G-SDI Level A or B-DL (4 x 3G), SMPTE-425-5
Dual Link 3G-SDI Level B-DS (2 x 3G), SMPTE-425-3
Single Link 3G-SDI Level A, B-DL, or B-DS, SMPTE 425
Quad Link HD-SDI (4 x 1.5G )
Dual Link HD-SDI (2 x 1.5G), SMPTE-372
Single Link HD/SD
Quadrant (Square Division) or 2SI (Two Sample Interleave) 4K/UltraHD input pixel mapping
8 x 1 selector feeds video processor(s) |
| Video Output Digital |
4 X 3G-SDI outputs, 4 x BNC
4 x 3G-SDI outputs, 4 x fiber or HD-BNC (optional SFP modules)
SFP fiber modules, 3G-SDI, Dual LC, Dual LC CWDM, Single LC, or Single SC, SMPTE-297
SFP fiber module, 12G/6G-SDI, dual LC, SMPTE-297
SFP coax module, 12G/6G-SDI, dual HD-BNC
12G/6G/3G/HD/SD, SMPTE-259/292/424/2081/2082
Single Link 12G/6G-SDI (with optional SFP module)
Quad Link 3G-SDI Level A or B-DL (4 x 3G), SMPTE-425-5
Dual Link 3G-SDI Level B-DS (2 x 3G), SMPTE-425-3
Single Link 3G-SDI Level A, B-DL, or B-DS, SMPTE 425
Quad Link HD-SDI (4 x 1.5G)
Dual Link HD-SDI (2 x 1.5G), SMPTE-372
Single Link HD/SD
Quadrant (Square Division) or 2SI (Two Sample Interleave) 4K/UltraHD output pixel mapping |
| Monitor Output |
1 x BNC, 1 x 3G-SDI output
3G-SDI/HD/SD, SMPTE-259/292/424, 10-bits
1 x HDMI, 1 x HD output
2K/HD/SD, HDMI v1.4a
Monitored Video Processor output (video and audio) is simultaneously output on both connectors
4K/UltraHD down-converted to 2K/HD
Crop control on HDMI output |
| Video Processing |
Motion adaptive deinterlacer
Proc amp controls
Color corrector
Legalizer
Framerate conversion/film cadence removal/insertion (3:2, 1:2, 2:1, 2:3)
Adjustable delay 0-6 frames with H and V timing controls
Closed Captioning conversion (CEA-608/CEA-708)
AFD input detection, down-convert control, and output pass-through, or overwrite
Freeze (manual, or on input signal loss) to black or last good frame
Matte generator for background fill
Video test generator
Nominal video delay
HD/SD, 2 frames (LFR), 4 frames (HFR) |
| Format Conversion |
Convert any supported input format to any supported output format, within the same frame rate family
Frame Rate Families:
59.94, 29.97, 23.98
50, 25
60, 30, 24 |
| Scaling |
Supported in 2K/HD/SD formats:
Zoom in/out
Reposition
Region of Interest (ROI) |
| Up-Conversion |
Hardware 10-bit
Zoom 14:9 - results in a 4:3 image zoomed slightly to fill a 14:9 image with black side bars
Zoom Letterbox - results in image zoomed to fill full-screen
Zoom Wide - results in a combination of zoom and horizontal stretch to fill a 16:9 screen -
introduces a small aspect ratio change |
| Down-Conversion |
Hardware 10-bit
Anamorphic - full-screen
Letterbox - image is reduced with black top and bottom added to image area
with the aspect ratio preserved
Crop - image is cropped to fit video output format |
| Aspect Ratio Conversion |
Letterbox -transforms SD anamorphic material to a letterboxed image
H Crop - produces a horizontally stretched effect on the image;
transforms anamorphic SD to full frame
SD Pillarbox - produces an image in the center of the screen
with black borders on the left and right sides and an anamorphized image in the center
V Crop - transforms SD letterbox material to an anamorphic image |
| Audio Input Digital |
48 kHz sample rate
8 x SDI embedded inputs (16-channels each)
128-Channels, 24-bit (20-bit SD), SMPTE-272/299
8 x balanced AES inputs (16-Channels), 1 x DB-25
16-Channels, 24-bit, AES-3
2 x MADI inputs, 1 BNC, 1 x ST Fiber
128-Channels, 24-bit, AES-10 |
| Audio Output Digital |
48 kHz sample rate
1 x SDI embedded output per video processor (16-Channels each)
16-Channels (in single-video processor mode), 24-bit (20-bit SD), SMPTE-272/299
64-Channels (in four Video Processor mode), 24-bit (20-bit SD), SMPTE-272/299
8 x balanced AES outputs (16-channels), 1 x DB-25
16-Channels, 24-bit, AES-3
2 x MADI outputs, 1 BNC, 1 x ST Fiber
128-channels, 24-bit, AES-10 |
| Audio Processing |
277 x 208 mono audio matrix, route 1 to 1, 1 to many
Inputs: 128 embedded, 16 AES, 128 MADI, 2 x stereo mixdowns, 3-tone generator
Outputs: 64 embedded, 16 AES, 128 MADI
Input adjustment controls for each channel
Gain +18 to -18 dB in 0.5 dB steps
Phase invert
Input adjustment controls for each channel pair
Delay -16 ms to +1 second in 20.8 µs steps
Two independent 5.1 or 7.1 to stereo mixdown processors with gain adjust
High quality Sample Rate Conversion on all audio inputs
SRC bypass for non-PCM audio (e.g. Dolby E, AC-3, etc)
Audio tone generator (mute, 400 Hz, 1 kHz) |
| Reference Input |
External, 2 x BNC
Looping, nonterminating
Blackburst or tri-level sync |
| Genlock |
Lock to External Reference
Lock to SDI input 1 - 8
Free-run based on temperature-compensated crystal oscillator |
| Network Interface |
1 x RJ-45, 10/100/1000 Ethernet
Embedded web server for remote control
SNMP |
| Front Panel |
Display
Keypad with status LEDs
Two rotary/push knobs
Comprehensive alarm indicators |
| Presets |
40 presets per mode |
| GPI |
1 x 25-pin D-Connector
4 x optically-isolated GPI inputs
4 x optically-isolated GPO outputs |
| Power |
100 to 240 VAC 50/60 Hz (dual, redundant power supplies)
55 W typical
70 W maximum |
| Environment |
Operating Temperature: 32 to 104°F (0 to 40°C)
Storage Temperature: -40 to 140°F (-40 to 60°C)
Operating Relative Humidity: 10 to 90%, non-condensing
Operating Altitude: <10,000' (<3000 m) |
| Dimensions (W x D x H) |
17.5 x 16 x 1.75" (1 RU) (445 x 406 x 45 mm) |
| Weight |
7.9 lb (3.6 kg) |
