Home > NEWS & EVENTS > Past Events >

2015 IBC Amsterdam
2015 IBC Amsterdam


International Broadcasting Convention

Event Details:

Dates: September 11-15, 2015
Location: RAI

Schedule: Click Here

Product Code: EVENT-IBC-091115
Request a Quote


International Broadcasting Convention

RAI Amsterdam

About IBC:
Since 1967, IBC has grown to become the most influential annual event for professionals engaged in the creation, management and delivery of electronic media, worldwide.

Originally the International Broadcasting Convention, IBC has evolved from its technical broadcast roots and today it encompasses the whole breadth of media creation management and delivery, from online content to digital cinema, from automated workflows to high resolution capture and display. IBC remains the principal event for the industry, and it continues to go from strength to strength. It now attracts more than 55,000 attendees, drawn from more than 170 countries, each September in Amsterdam.

The peer-reviewed technology conference remains the place to launch the most important new thinking. A fundamental part of the IBC Conference are the Technical Papers which sit alongside a wide-ranging programme of panels, discussions and keynotes, which have attracted not just broadcast leaders but luminaries as varied as Professor Brian Cox and will.i.am.

The conference is matched with a comprehensive exhibition which brings together close to 1,700 exhibitors, each showcasing the state of the art in technology. IBC is unrivalled as a place to meet and share knowledge, and its networking opportunities and value added events – from awards to movie screenings – really contribute to the worth of attending.

To meet the demands of this new and hugely expanded market IBC continues to create innovative ways to engage with its audiences, including the introduction of the Rising Stars programme aimed at helping the new generation of content and media technology professionals find their feet in the industry, and the exclusive invitation-only Leaders’ Summit, an event for 150 leaders of the electronic media and entertainment industry shaping future strategy. IBC has also created a new series of events – IBC Content Everywhere – which take IBC’s excellence in new directions.

All of the experience and knowledge of IBC, run by the industry for the industry, is reflected in this new series of events, which look to the connected future. IBC Content Everywhere demonstrates the changing nature of the world of connected electronic media. Like IBC it provides a forum for debate and discovery of the business, technical and creative opportunities, but IBC Content Everywhere reflects the very different nature of media connectivity in an IP world giving it a unique and carefully tailored look and feel.

Three editions of IBC Content Everywhere a year – in the Middle East and North Africa in January, in Europe alongside IBC in September and in Latin America later in the year– incorporate a vibrant exhibition, a content theatre and a thought-leadership conference. Smart use of connected technology and social media make the information sharing relevant for today’s business leaders.

Go To the IBC Website

From Blackmagic Design

This year we have an update on URSA Mini, a new B4 lens mount for URSA Mini, some new 12G-SDI Teranex Mini converter models for Quad Link conversion and 12G-SDI distribution and we have a new DeckLink Quad 2 card that’s able to capture or playback up to 8 separate channels on the one card.

We also have some new software updates for Blackmagic MultiView that adds VU meters and better labelling and we have another new software update for Teranex Express that adds recursive noise reduction and a new home screen display.

Lastly we have an IP Video technology demonstration at the Blackmagic Design IBC stand where we are showing Ultra HD being connected between 2 Teranex Mini converters via a 10G optical IP Ethernet switch.

Blackmagic URSA Mini Update

We have now started to build URSA Mini and we will be delivering throughout September. Because we had a few delays with the metalwork, we have had the chance to add some nice updates since we launched the camera at NAB.

We have included the reference video input and the timecode on the same connector so we now have a free connection for adding 12G-SDI input. This will let us use the URSA Mini with an external recorder better but also means we can use URSA Mini as a live production or studio camera!

There is a program button that lets you select to see the 12G-SDI input on the fold out screen or the viewfinder. Both the EF and PL models of URSA Mini will have this 12G-SDI input and we think they will make fantastic studio cameras!

Another new feature we have added is a B4 lens control connector to the URSA Mini PL models. This will let the camera power the lens and it also means the camera can control the IRIS and the record button on the lens will start and stop camera recording.

Unfortunately we have had to remove the GPS feature the URSA Mini 4.6K models had as we could not get reliable satellite reception with the current design. This is a shame as I love GPS and wanted to be able to tag the location into the files when shooting outdoors.

We think these new features to the URSA Mini will make the camera much better and it’s great we could add these requests into the final version of the camera design.


Blackmagic URSA Mini B4 Mount

An extremely common request we have had from customers, is for the ability to keep using their older HD broadcast lenses. People have spent a lot of money on these lenses and they need the parfocal ability to be able to zoom and keep the focus through the range of the zoom.

So we have a new lens mount that we are showing at IBC and it lets you take the mount off a PL URSA Mini and add a B4 lens mount. It's quite easy to do as you just take the PL lens mount off where it's normally removed for shimming the PL lens. Then once it’s removed, you just bolt on the B4 lens mount and you now have a B4 camera!

Then you simply plug the lens into the new lens mount connection to power and control the lens. This new lens control connector on the URSA Mini PL supports both analog and digital lens control standards and will also power the lens. This means you can even use the older broadcast B4 lenses with analog lens control.

The new URSA Mini B4 lens mount includes precision optics so it conforms to the B4 lens standard and will map the lens mount to a HD window on the sensor in the URSA Mini. Plus removing the PL lens mount to change to B4 is a much better solution than using a PL adapter as it lets you take off the weight of the PL mount, it’s also strong and smaller.

When the URSA Mini is running HD with these HD lenses, you can get up to 80 frames per second. As these B4 lenses are HD rated, this is a fantastic solution because you get modern file formats such as RAW, ProRes and DNX, plus you get metadata and much more!

These broadcast lenses have a smaller aperture so their zoom range is amazing, plus you can pick them up second hand online and at quite an affordable price. Also as this is a simple lens mount change you can change back and forward between PL and B4 as you need.

We think with these new changes to URSA Mini and the B4 lens mount, that customer have the high end live production camera they need for studio work as well. This new URSA Mini B4 Turret will be available next month for $295 and it can be used on both the 4K and 4.6K URSA Mini PL models.


New Teranex Mini Quad Link SDI Converters

We have some new Teranex Mini converter models for handling Quad Link SDI and distribution at all SDI rates up to 12G-SDI.

Since we introduced 12G-SDI products, we have been asked for a solution to convert between modern 12G-SDI equipment and older Quad Link 4K equipment.

These new converters are designed for this task and we have the new Teranex Mini 12G-SDI to Quad Link SDI model and the Quad Link SDI to 12G-SDI model.

A great example is if you wanted to connect Quad Link SDI to the new HyperDeck Studio 12G then you just use the Quad Link SDI to 12G-SDI model to do it. Doing this would let you record from any Quad Link Ultra HD device direct onto the SSD in the HyperDeck Studio 12G.

I personally think that 12G-SDI is much better as it uses only 1 cable instead of 4 cables and it will instantly switch between SD, HD and Ultra HD without changing cabling.

Imagine trying to use 8 separate BNC cables just to plug the input and output of Ultra HD equipment vs 2 12G-SDI cables instead. Then trying to route it would use up most of a large router! So the best solution is to convert any Quad Link SDI Ultra HD products to 12G-SDI with these new Teranex Mini converters.

The Teranex Mini 12G-SDI to Quad Link SDI model can also act as a video wall processor as you can take the Ultra HD and send a HD tile out to 4 separate screens.


New Teranex Mini SDI Distribution 12G

We also have another new Teranex Mini model and this one is called Teranex Mini SDI Distribution.

This new model is a 12G-SDI distribution converter that lets you send any SD, HD or Ultra HD video connection out to 8 separate 12G-SDI outputs, so you can send a single SDI connection to multiple devises. Like all the Teranex Mini converters it will automatically switch to the SDI input format and handles all SDI, HD-SDI, 3G-SDI, 6G-SDI and 12G-SDI rates.

Because these new models are part of the Teranex Mini family, you can also add the Teranex Mini Smart Panel to see what you are converting on the front panel.

These new Teranex Mini models will be available in a few weeks for $495 US from all Blackmagic Design dealers worldwide.


IP Video Demonstration

Another new technology we have been working on for a while is video over IP and we would like to give you an update on our progress.

Most of our 12G-SDI products have space for an optical fiber SDI module and this allows them to be upgrade to optical SDI if you need to use it. However what it also means is that we are preparing to be able to introduce models of these products that will allow a 10G data module to be used so the products can have IP video capability built in.

I think this is a much better solution than using converters all over the place and allows the same equipment to plug into both SDI and IP based systems.

We are showing this on our booth at IBC and what we are showing will be a technology demonstration of Ultra HD connected via a 10G optical IP switch between two prototype Teranex Mini IP Video products.

We are currently talking to the major broadcasters about workflows and if you are looking into IP based systems, please come by so we can discuss what you need and how you would like to integrate IP video into your systems.

Blackmagic MultiView Update

We also have a new software update for Blackmagic MultiView we will be showing at this IBC and it includes new audio meters and on screen labels.

The VU meters let you see the audio levels on each video input and they feature correct VU ballistics that accurately conform to the VU meter standard. The meters are displayed independent of how many views you have selected and because the output can be Ultra HD, the meter graphics are very sharp and clear.

We have also worked on updating the design of the on screen view labels and they are more subtle and elegant now and match the view size better. You can turn the audio meters, labels and the borders around the views on and off independently in the on screen menus as you need.

Please visit our booth at IBC to see this new software running and keep an eye out for this software which is due in a few weeks and will be a free update.


Teranex Express Update

Another new software update we have is for Teranex Express and with this new software it’s now even more powerful than ever. We have added extremely powerful recursive noise reduction, so you can clean up noise video sources such as older videotapes

Another new feature is a new home screen that now shows you video, audio meters, video standard and timecode displayed. I think it’s really nice being able to see the audio levels and the timecode display is really helpful when you need to confirm your timecode settings are correct.

With our recent update that includes full motion conversion, not only does Teranex Express convert between all SD, HD and Ultra HD video formats, but it can now also do noise reduction and much more. It’s extremely powerful now!

This new software will be available next week free of charge, so please check out our website to download it and upgrade Teranex Express with these new features!


Decklink Quad 2

Next at this IBC is a new DeckLink Quad capture and playback card. This new model is designed for developers, system integrators and OEM's who need multiple channels of video in and out of the computer in a single card.

The new model has 3G-SDI on all channels so it can do SD and HD video formats up to 1080p60. What's really exciting is this new model actually has 8 channels internally so it's a lot more powerful and configurable than the previous model.

For example, you can change in software the SDI connection on the card to have up to 8 channels of playback or 8 channels of capture all on the same card.

By default at startup it has 4 channels with an SDI connector for input and an SDI connector output on each of the 4 channels. But then what you can do in the software SDK, is change the channels to split and take one of the SDI connectors to the other channel.

What this means is you can then capture or playback on each of the channels independently and you might want to capture on both or playback on both. You can do this to all 4 channels on the card so you end up with any combination of capture or playback on all 8 SDI connectors.

For example, you might need 8 channels of capture, or you might need 8 channels of playback. You might need 1 channel of capture and 7 channels of playback. It’s really up to what your custom solution needs and you can do any combination you like!

The new DeckLink Quad 2 card will be available soon for $995.


DaVinci Resolve 12 Final Release

Lastly we have a quick update on DaVinci Resolve which has been received extremely well and we have been getting fantastic feedback.

We have added many of the suggestions you have told us about and we have listened as you have used the new features on real jobs and told us how they performed. DaVinci Resolve is stable and worked very well and today we have just posted the release version of DaVinci Resolve 12 to our website.

We would really like to thank everyone that helped us beta test DaVinci Resolve and for all the wonderful feedback you have given us. Their advice has been greatly appreciated. Now we are going to get busy working on the next DaVinci Resolve so please keep talking to us and helping us make it even better!


Fusion 8 Beta 2

The new Fusion 8 has also been extremely well received and we have just released a new beta update today for both Mac and Windows. This new beta now includes a lot of fixes that people needed, as now we have more time to work on these issues to get it finished.

Fusion is an incredibly powerful motion effects software tool and now with the Mac and Windows versions it’s been received extremely well by customers.


That’s all for this IBC and we hope you like these new updates we have for this years IBC and get the chance to check them out on the booth in detail. It's through your support of us that we can design all these wonderful tools and we will always be very thankful to be able to work with you all.

Also if you would like updates when we release new software then please follow us on Twitter. We don't send out emails very often because people find email annoying. However at the same time we want to make sure you hear about new software updates we are releasing as we add lots of new features all the time.

Share your knowledge of this product. Be the first to write a review »